CALL US! (303) 758-1662

Fit Blade V3 Fork

$109.99

BLADE V.3

Our goal was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of R&D and a lot of investment in tooling, the Blade V.3 is available with a traditional 33mm offset. Here are a few features that make these forks so strong.

  • Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection.
  • Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.
  • A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.
  • Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance./li>
  • Post weld 4Q Baked heat-treatment

      SPECS >

      • LEGS
      • DROPOUTS
      • STEERER TUBE
      • STEERER TUBE LENGTH
      • COMPRESSION
      • AXLE TO CROWN
      • OFFSET
      • WEIGHT
      • HEAT TREAT
      • Seamless Swaged (No Welded Cap)
      • Investment Cast
      • 1 Piece CNC-Machined 4130 CrMo
      • 166mm
      • M24 X 1.5 Thread - 6mm Allen Slot
      • 320mm
      • 33mm
      • 2.25 lb (1.02 kg)
      • 4Q Baked Post-Weld

      Related products